Liquid degreaser - Suma Break Up 5 L, compatible with Aluminum

Suma Break Up D3.5 is a concentrated liquid degreaser for cleaning heavily soiled kitchen surfaces.

Basic properties Suma Break Up D3.5 is an alkaline liquid detergent, intended for manual degreasing of all heavily soiled surfaces in kitchens, such as floors, equipment, cooker hoods.

It is an optimal blend of nonionic and anionic surfactants, for good wetting of surfaces, and alkaline and sequestering agents, for the efficient removal of all types of grease and dried food residue from surfaces.

The product is formulated so that it can be used on aluminum surfaces, without risk of corrosion.

Suma Break Up D3.5 is particularly suitable for cleaning floors, either manually, with a mop system or with low-pressure spray equipment.

Advantages of Suma Degreaser compatible with aluminum:

- Powerful formula to remove grease and food residue, leaving surfaces clean and shiny

- Dissolves all fats, keeping them in suspension and preventing their redeposition

- Non-caustic formulation, suitable for aluminum surfaces

- Suitable for use with foaming equipment

Instructions for use Suma Degreaser compatible with aluminum:

The recommended concentration of Suma Break Up D3.5 varies between 10-30 ml/L of warm water, depending on the degree of dirt and application.

For controlled dosing, the product can be used via Diversey's QFM system.

General cleaning method:

1. Apply the solution (10-20ml/L) to the surface to be cleaned using a cloth, pad or low-pressure spray equipment.

2. Clean with a cloth or brush.

3. Rinse with warm water and let dry.

Floor cleaning:

Application with a mop:

1. Dilute the product (10-30 ml/L) in warm water.

2. Apply the solution using a mop.

3. Remove the dirt with the mop.

4. Rinse with water and let dry.

Cleaning with a squeegee and a water vacuum cleaner:

1. Dilute the product (10-30 ml/L) in warm water.

2. Apply the solution using a brush or low-pressure spray equipment and rub.

3. Remove residue with a scraper or vacuum.

4. Rinse with water and remove residue again with a scraper or vacuum.

Soaking cleaning:

1. Immerse in a solution of 10 - 20 ml of product/liter of warm water.

2. Scrub and clean with the brush to remove heavy deposits.

3. Rinse with water and let dry.

Cleaning fryers:

1. Drain the oil and close the valve.

2. Fill with water until almost the oil level.

3. Add 1L of Suma Break Up D3.5 to 10L of water (10% w/w). Check the oil capacity for the fill level.

4. Turn on the fryer and bring to a controlled boil for 60 minutes.

5. After cooling and draining, scrub any residue left on the side walls and heating elements with a sponge or brush.

6. Rinse twice with clean, hot water, let dry.